Automatic drilling machine was created to replace manual with automation equipment manufacturing, to solve the problem of traditional punching, drilling, reaming, milling and other processing sectors in punching by hands. With the development of automation and network technology, Automatic punching machine develop towards a favorable direction of automation and remote control.

 

One serial port, support Modbus protocol with low cost.

1). High precision CAM indexer, accurate positioning for stop.

2). Set two products simultaneously, efficiency doubled

3). Two or more holes processed simultaneously, saving processing time and labor costs.

4). Automatic detection devices, high products quality.

5). Mounted to the automatic picking manipulator

6). Optional automatic oil supply system, automatic feeding system.

   1).Using the LeviStudio software to develop the project for control system, showing clear with text notes.

     The following picture, it divide the control processes into six sections to make the control more easily,the middle column is the data setting including the number of holes and processed holes.

 Here is the parameter setting, including the first hole indexing time, transfer time detection, drilling time display, drilling time setting,  positioning delay and the center distance delay.

This is alarm screen to display alarm message and time etc.

Wecon HMI are full functioning, reliable and easy to learn how to programming.

Compared with other brand HMI products, Wecon HMI project development tool are more easy to make HMI project.

Wecon PLC are with high performance, could control many complex logic process. combination of Wecon HMI and PLC, so that you can get efficient control operation.

Compared with other brand HMI products, Wecon HMI project development tool are more easy to make HMI project.

Wecon PLC are with high performance, could control many complex logic process. combination of Wecon HMI and PLC, so that you can get efficient control operation.